Polar Pro ND & CP Filters for DJI Phantom 3 Quadcopter - 6 Pack
Polar Pro ND & CP Filters 3 for DJI Phantom 3 Quadcopter - 6 Pack
Compatible with: Phantom 3 Advanced & Professional only.
The PolarPro DJI Phantom 3 Professional Pack includes 6 high grade filters for aerial filming in nearly any lighting condition. PolarPro's new ultra-light high definition glass has been made specifically for use with the Phantom 3 camera and gimbal. The PolarPro Phantom 3 filters are designed to replace the stock UV filter on the Phantom 3 camera (which weighs 3 grams). This way 3 grams is removed before installing our filters.
- Includes CP, ND8, ND16, ND32, ND8/PL, ND16/PL
- Precise aluminum threaded design replaces stock UV filter
- New lightweight design adds as little as 1.2 grams to the gimbal
Even when adding even our heaviest filter (ND16/PL) to the gimbal, only a net increase of 3.36 grams is added to the gimbal. Each filter has a lightweight aluminum frame which threads onto the DJI Phantom 3 camera for easy installation and removal. (Note: you must remove the stock DJI UV filter before threading our filters on). The PolarPro Professional filter set gives you 6 unique options to capture epic content in any lighting condition.
Circular Polariser Filter (CP) (4.64g): The circular polariser filter helps enhance aerial videos by reducing the amount of light reflecting off of the ground, leaving behind beautifully saturated colors and also improving contrast. This CP filter reduces the camera's shutter speed by 1.4 f stops. Our target shutter speed is 1/100-1/150th so normally we use this CP during the early morning hours or dusk when we don't have to knock down the shutter speed too much.
3-Stop Neutral Density Filter (ND8) (4.06g): The 3-stop ND filters are typically what we use in medium light. This filter also helps reduce jello-effect by reducing the cameras shutter. This is our go-to filter for partly cloudy days.
4-Stop Neutral Density Filter (ND16) (3.85g): The 4-stop ND filter is what we use on brighter days, where we need to knock the shutter down by 4 stops to achieve a shutter of 1/100-1/150th. This filter will curb nearly all jello caused by the high vibrations of the Phantom 3 motors.
5-Stop Neutral Density Filter (ND32) (3.47g): The 5-Stop ND filter is what we use on extremely bright days. This filter is designed to take down the Phantom 3's shutter speed by 5 stops. This is a very dark filter so it should only be used where there is enough available light to reduce. We use this shooting in the desert or over snow on very bright days.
3 Stop Polarizer (ND8/PL) (4.54g): The ND8/PL is a versatile filter, which reduces the cameras shutter speed by 3 stops while also providing polarisation. Perfect for conditions that are too bright for the CP filter, the ND8/PL allows you to reduce the shutter speed 3 stops while also capturing beautifully saturated colors.
4 Stop Polarizer (ND16/PL) (5.36g): The ND16/PL provides 4 stops of shutter speed reduction while also providing polarisation. This is our go-to filter for sunny days where we want to capture saturated colors and improve saturation.
1 x Phantom 3 CP Filter
1 x Phantom 3 ND8 Filter
1 x Phantom 3 ND16 Filter
1 x Phantom 3 ND32 Filter
1 x Phantom 3 ND8/PL Filter
1 x Phantom 3 ND16/PL Filter
GIMBAL USERS: Refer to the gimbal manufacturer about safely using our products with your specific gimbal make and model. Not all gimbals can safely support extra weight. Polar Pro/Hobby Mounts will NOT be liable for damage.
Note: Camera not included
Write a reviewYour Name:
Your Review:Note: HTML is not translated!
Enter the code in the box below: